 |
|
| Multifunctional Electric Vehicle Charger is designed to fullfill all kind of power requirements of Electric Vehicle battery
Charging which operates in wide AC Input range (170 - 300VAC) and to withstand the adverse Indian power conditions.
It is designed with high frequency switching technology that makes it highly reliable, cost effective, compact in size and
light in weight. |
SALIENT FEATURES :
|
- Micro Controller based 5 stage intelligent charger.
- Designed to meet adverse Indian power condition and suitable for different makes of batteries.
- Enhance life of batteries by reducing sulfation through pulse charging.
- Non Resettable Accurate Safety Timer for enhanced Battery Protection.
- Accurate Battery Charging Current Limit.
- Battery reverse polarity protection.
- Defective battery detection with alarm and auto cut off.
- Battery full charge cut off with audio indication.
- Programmable accurate Output Over Voltage protection. |
| SPECIFICATION : |
| INPUT SPECIFICATION |
36V,10.0A |
48V,10.0A |
| Input Voltage Range |
180VAC-300VAC-50/60Hz |
180VAC-300VAC-50/60Hz |
| Inrush Current |
<40APeak @ 230VAC,Cold start @ 25°C |
<50APeak @ 230VAC,Cold start @ 25°C |
| Input Current |
<4A rms @ 180VAC and output full load |
<5A rms @ 180VAC and output full load |
| OUTPUT CHARACTERISTICS |
|
|
| Output Voltage |
45VDC |
60VDC |
| Output current max |
10.0Amp |
10.0Amp |
| Line &Load Regulation |
Tolerance ±5% Measured at the cable end |
Tolerance ±5% Measured at the cable
end |
| Ripple |
<450mV.Pk-Pk |
<600mV.Pk-Pk |
| Output Over Current limit(Min) |
9.5 A |
9.5Amp |
| Output Over Current limit(Max) |
10.5 A |
10.5Amp |
| PROTECTIONS |
|
|
| Output overload protection |
Available |
Available |
| Output short circuit protection |
Available |
Available |
| Output over voltage Protection |
Available |
Available |
| Input over voltage protection |
Available |
Available |
| Battery reverse protection |
Available |
Available |
| Faulty battery detection & disconection |
Available |
Available |
| Battery full Charge auto cutt-off |
Available |
Available |
| SAFETY & EMI |
|
|
| Safety |
Designed to meet IEC 60950 |
Designed to meet IEC 60950 |
| EMI |
CISPR22 / FCC Class-A |
CISPR22 / FCC Class-A |
| MECHANICALS |
|
|
| Out side dimensions |
W=199.0mm,D=224.0mm,H=92.0mm |
W=199.0mm,D=224.0mm,H=92.0mm |
| AC Input connection |
3 Pin AC plug with 2 core cable directly
soldered to the PCB |
3 Pin AC plug with 2 core cable directly
soldered to the PCB |
| DC Output Connection |
Terminal Connector |
Terminal Connector |
|
|
