 |
|
| Intelligent Electric Bike Charger is designed to fullfill all kind of power requirements of Electric Bike battery
Charging which operates with wide AC Input range (170 - 300VAC) and to withstand the adverse Indian power
conditions. It is designed with high frequency switching technology that makes it highly reliable, cost effective,
compact in size and light in weight. |
SALIENT FEATURES :
|
- Micro Controller based 5 stage intelligent charger.
- Designed to meet adverse Indian power condition suitable for different makes of batteries and operate
with both 110/ 230 VAC.
- Enhance life of batteries by reducing sulfation through pulse charging.
- Non Resettable Accurate Safety Timer for enhanced Battery Protection.
- Accurate Battery Charging Current Limit.
- Battery reverse polarity protection.
- Defective battery detection with alarm and auto cut off.
- Battery full charge cut off with audio indication.
- Programmable accurate Output Over Voltage protection. |
| SPECIFICATION : |
| INPUT SPECIFICATION |
48V,5.0A |
| Input Voltage Range |
180VAC-300VAC-50/60Hz |
| Inrush Current |
<35APeak @ 230VAC,Cold start @ 25°C |
| Input Current |
<2.0A rms @ 170VAC and output full load |
| OUTPUT CHARACTERISTICS |
|
| Output Voltage |
60.0VDC |
| Output current max |
5.0Amp |
| Line &Load Regulation |
Tolerance ±5% Measured at the cable end |
| Ripple |
<600mV.Pk-Pk |
| Output Over Current limit(Min) |
4.8Amp |
| Output Over Current limit(Max) |
5.2Amp |
| PROTECTIONS |
|
| Output overload protection |
Available |
| Output short circuit protection |
Available |
| Output over voltage Protection |
Available |
| Input over voltage protection |
Not Available |
| Over temperature shutdown with auto recovery |
Available |
| Battery reverse protection |
Available |
| Faulty battery detection & disconection |
Available |
| Battery full Charge auto cutt-off |
Available |
| SAFETY & EMI |
|
| Safety |
Designed to meet IEC 60950 |
| EMI |
CISPR22 / FCC Class-A |
| MECHANICALS |
|
| Out side dimensions |
W=126.0mm,D=196.0mm,H=90.0mm |
| AC Input connection |
3 Pin AC plug with 2 core cable directly soldered to the PCB |
|
|
